QT-Ez 12M
INCLUDES THE FOLLOWING SOFTWARE OPTIONS: NO051 USER MACRO (COMMON VARIABLES:600 PAIRS) NO075 MAZAK TAPPING/BORING TORNADO (G130) NO098 EIA/ISO CODE INPUT FUNCTION NO139 ADD'L EIA/ISO FUNCTIONS: *SPIRAL INTERPOLATION (EIA)(G02.1/G03.1) *PATTERN ROTATION (EIA) *3 DIMENSIONAL CUTTER COMPENSATION (EIA) *GEOMETRIC COMMAND (EIA) *SCALING (EIA)(G50/G51) *EXTERNAL DATA INPUT/OUTPUT (EIA) *CYLINDRICAL INTERPOLATION (G07) NO142 INVERSE TIME FEED (G93) NO144 SEQUENCE NUMBER COMPARISON STOP FUNCTION NO481 ADD'L WORKPIECE COORDINATE SYS 300 PAIRS NO483 THREAD CUTTING FUNCTION (G33) NO509 POLAR COORDINATES INPUT (G122)(EIA) NO516 EIA PATTERN CYCLE (GRID, ARC) (G34.1 / G35 / G36 / G37.1)
INCLUDES THE FOLLOWING SOFTWARE OPTIONS: NO443 B)MAZACC-2D SOFTWARE(SHAPE COMPENSATION)(G61.1) * VARIABLE ACCELERATION CONTROL * SEAMLESS CORNER CONTROL NO498 RAPID OVERLAP
NOTE: 3" Diameter Bar Capacity. Credit for standard chuck and cylinder is already included.
(MT No.5) (290 PSI / 2.0 Mpa MAX) **NOTE: DOES NOT INCLUDE THE LIVE CENTER
Allows the base units of a machine to be changed between inch and metric units.
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
w/ Fanuc CRX-10iA/L Robot ARM and 2-zone area scanner Payload Capacity: Up to 10kg - Customer to supply separate 110VAC, 15 amp power drop -Includes Robot Interface Ethernet/IP
w/ Schunk PZN-100-1-SD Part Weight: up to 5.5kg (CC-10 ONLY) Part Diameter: Min dia. 25mm, Recommended max dia. 150mm, Absolute max dia. 200mm Stroke: 10mm per jaw Finger adjustment: Every 2.5mm Part OD Turn Capability: <16mm
w/ Dual Schunk PZN-80-1-SD Part Weight: up to 5kg Part Diameter: Min dia. 25mm, Max dia. 100mm Stroke: 8mm per jaw Finger adjustment: Every 5mm Part OD Turn Capability: from max to min dia.
PRICE INCLUDES: Two (2) Pushers, One (1) Spindle Liner, Mazak Interface, One (1) Year Warranty and Installation by Edge Service Engineer.
PRICE INCLUDES: Three (3) Pushers, One (1) Spindle Liner, Mazak Interface, One (1) Year Warranty and Installation by LNS Service Engineer.
PRICE INCLUDES: Two (2) Pushers, One (1) Spindle Liner, Mazak Interface, Two (2) Year Warranty and Installation by ATS Service Engineer.
INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.
5B078002003 CAP PLATE 2 5B078012601 TURNING HOLDER 4 5B078012701 FACING HOLDER 1" x 1" x 6" 1 5B078011803 BORING BAR HOLDER 1-1/2"ID 2 53178011102 BORING BAR SOCKET 1-1/4"ID X 1-1/2"OD 1 53178011202 BORING BAR SOCKET 1"ID X 1-1/2"OD 1 53418013200 DRILL SOCKET MT NO 2 ID X 1-1/2"OD 1 5B078011902 U-Drill Holder 40MM ID 1 5B728003602 H-TYPE MILLING HOLDER II 3/4" ID 1 5B728003802 V-TYPE MILLING HOLDER II 3/4" ID 1 53628091400 ER32-12 COLLET 0.472"ID 1 53628091800 ER32-16 COLLET 0.630"ID 1 5B076600303 REMOVAL TOOL FOR H-TYPE MILLING HOLDER 1 5B076600312 REMOVAL TOOL FOR V-TYPE MILLING HOLDER 1 P03ZZ000700 HOOK SPANNER 1
Turning Holder, 1" (EPPINGER 7.073.995) 3 Boring Bar Holder, 1-1/2" ID (EPPINGER 7.078.198) 3 U-Drill holder, 1-1/2" ID (EPPINGER 7.078.200) 1 H-Type Milling Holder, 6,000 RPM / ER25 / 60 N-m (EPPINGER 7.077.968) 1 V-Type Milling Holder, Straight 6,000 RPM / ER25 / 40 N-m (EPPINGER 7.073.118) 1 Blank Plate, (EPPINGER 7.075.615) 3 Wrench, ER25 (EPPINGER 0.000.468) 1 Hook Spanner, 48-60 9 (EPPINGER SW24) 1
