VC-Ez 16
Unleash your shop’s full manufacturing Productivity.The VC-Ez ensures dependable productivity and high throughput, all at an exceptional value.
- Rugged 25 hp, 12,000 rpm (standard) or versatile 29.5 hp, 15,000 rpm (optional) spindle
- Highly efficient 30-tool auto tool changer (50-tool option).
- Hybrid MX Roller Guide System improves rigidity, accuracy and reliability.
- Pre-tensioned ball screw system with support at each end.
- New space-saving machine design with optional chip management solutions.
Collateral:
| File | Download |
|---|---|
| VC-Ez Series Brochure | Download |
| VC-Ez Installation Requirements | Download |
| VC-Ez Series Flyer | Download |
| Top 10 Things About Ez Infographic | Download |
PDF Drawings:
| File | Download |
|---|---|
| 50-tool with Magazine Door | Download |
| 50-tool with Hinge Conveyor | Download |
| 50-tool with Hinge Conveyor and Magazine Door | Download |
| 50-tool with Auger Conveyor | Download |
| 50-tool with Auger Conveyor and Magazine Door | Download |
| 50-tool with 95 gallon Coolant | Download |
| 50-tool with 95 gallon Coolant_Hinge Conveyor and Magazine Door | Download |
| 50-tool with 95 gallon Coolant_Auger Conveyor and Magazine Door | Download |
| 50-tool with 95 gallon Coolant and Magazine Door | Download |
| 50-tool with 95 gallon Coolant and Hinge Conveyor | Download |
| 50-tool Standard | Download |
| 30-tool with a 95 gallon Coolant Tank | Download |
| 30-tool with a 95 gallon Coolant Tank and Magazine Door | Download |
| 30-tool with a 95 gallon Coolant Tank and Hinge Conveyor | Download |
| 30-tool with a 95 gallon Coolant Tank and Auger Conveyor | Download |
| 30-tool with a 95 gallon Coolant _Hinge Conveyor and Magazine Door | Download |
| 30-tool with a 95 gallon Coolant _Auger Conveyor and Magazine Door | Download |
| 30-tool Standard | Download |
| 30-tool Standard with Magazine Door | Download |
| 30-tool Standard with Hinge Conveyor | Download |
| 30-tool Standard with Hinge Conveyor and Magazine Door | Download |
| 30-tool Standard with Auger Conveyor | Download |
| 30-tool Standard with Auger Conveyor and Magazine Door | Download |
DWG Drawings:
| File | Download |
|---|---|
| 50-tool with Magazine Door.dwg | Download |
| 50-tool with Hinge Conveyor.dwg | Download |
| 50-tool with Hinge Conveyor and Magazine Door.dwg | Download |
| 50-tool with Auger Conveyor.dwg | Download |
| 50-tool with Auger Conveyor and Magazine Door.dwg | Download |
| 50-tool with 95 gallon Coolant.dwg | Download |
| 50-tool with 95 gallon Coolant_Hinge Conveyor and Magazine Door.dwg | Download |
| 50-tool with 95 gallon Coolant_Auger Conveyor and Magazine Door.dwg | Download |
| 50-tool with 95 gallon Coolant and Magazine Door.dwg | Download |
| 50-tool with 95 gallon Coolant and Hinge Conveyor.dwg | Download |
| 50-tool with 95 gallon Coolant and Auger Conveyor.dwg | Download |
| 50-tool Standard.dwg | Download |
| 30-tool with a 95 gallon Coolant Tank.dwg | Download |
| 30-tool with a 95 gallon Coolant Tank and Magazine Door.dwg | Download |
| 30-tool with a 95 gallon Coolant Tank and Hinge Conveyor.dwg | Download |
| 30-tool with a 95 gallon Coolant Tank and Auger Conveyor.dwg | Download |
| 30-tool with a 95 gallon Coolant _Hinge Conveyor and Magazine Door .dwg | Download |
| 30-tool with a 95 gallon Coolant _Auger Conveyor and Magazine Door.dwg | Download |
| 30-tool Standard.dwg | Download |
| 30-tool Standard with Magazine Door.dwg | Download |
| 30-tool Standard with Hinge Conveyor.dwg | Download |
| 30-tool Standard with Hinge Conveyor and Magazine Door.dwg | Download |
| 30-tool Standard with Auger Conveyor.dwg | Download |
| 30-tool Standard with Auger Conveyor and Magazine Door.dwg | Download |
VC-Ez 16
The following functions are included as standard on the SMOOTH control: NO443 B)MAZACC-2D SOFTWARE(SHAPE COMPENSATION)(G61.1) NO444 D)MAZACC-3D HIGH-SPEED SOFTWARE PACKAGE(G5P2) NO445 B)SHAPE COMPENSATION FOR ROTARY AXES NO497 D)HIGH SMOOTHING CONTROL (REQ.MAZACC-3D) NO498 RAPID OVERLAP The following additional control functions are with the SMOOTH STANDARD PACKAGE: * SEAMLESS CORNER CONTROL * VARIABLE ACCELERATION CONTROL * ULTRAHIGH-SPEED MACHINING MODE
Allows the base units of a machine to be changed between inch and metric units.
This option allows the programmer to temporarily shift the workpiece origin to a new location using any combination of X, Y, Z and make that the active cutting plane. G68 G-Code is used.
Note: Requires manual cylinder position/angle adjustment. Up to a 6" maximum stroke for air nozzle.
Note: Air nozzle can be programmed to rotate to specific angular positions for each tool. Up to a 6" maximum stroke for air nozzle. Air nozzle can be used in conjunction with or without programmable coolant.
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
NOTE: THIS PACKAGE INCLUDES THE RENISHAW WIRELESS OTS-AA TOOL SETTER WITH ROTATING TOOLSETTING SOFTWARE CABABLE OF SETTING LENGTH, DIAMETER, AND DETECTING BROKEN TOOLS. THIS PACKAGE ALSO INCLUDES THE PREP FOR MAZAL MONITORING SYSTEM B OPTICAL OMP60 WITH INSPECTION PLUS SOFTWARE.
NOTE: INCLUDES RENISHAW OMI-2T DUAL PROBE OPTICAL RECEIVER, OMP60 OPTICAL PROBE (AA BATTERY), WIRELESS OTS-AA TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
NOTE: INCLUDES RENISHAW RMP600 RADIO PROBE, TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.
w/ Fanuc CRX-10iA/L Robot Arm
w/ UNIVERSAL ROBOTS UR10e Robot Arm
Electrical I/F Only.
NOTE: Hydraulic Clamp/Hydraulic Unclamp/Pneumatic Part Seat)
NOTE: 2 Hydraulic Clamp/2 Hydraulic Unclamp/2 Pneumatic Part Seat)
NOTE: The CD-ROM set consists of all maintenance, operation, parts, electrical, PLC, service procedure, tooling, CNC programming and operation manuals.
VC-Ez 20
NOTE: Extended Card can be used to connect CNC to field network (robot, sequencer, remote IO).
Allows the base units of a machine to be changed between inch and metric units.
This option allows the programmer to temporarily shift the workpiece origin to a new location using any combination of X, Y, Z and make that the active cutting plane. G68 G-Code is used.
Note: Requires manual cylinder position/angle adjustment. Up to a 6" maximum stroke for air nozzle.
Note: Air nozzle can be programmed to rotate to specific angular positions for each tool. Up to a 6" maximum stroke for air nozzle. Air nozzle can be used in conjunction with or without programmable coolant.
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
NOTE: THIS PACKAGE INCLUDES THE RENISHAW WIRELESS OTS-AA TOOL SETTER WITH ROTATING TOOLSETTING SOFTWARE CABABLE OF SETTING LENGTH, DIAMETER, AND DETECTING BROKEN TOOLS. THIS PACKAGE ALSO INCLUDES THE PREP FOR MAZAL MONITORING SYSTEM B OPTICAL OMP60 WITH INSPECTION PLUS SOFTWARE.
NOTE: INCLUDES RENISHAW OMI-2T DUAL PROBE OPTICAL RECEIVER, OMP60 OPTICAL PROBE (AA BATTERY), WIRELESS OTS-AA TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
NOTE: INCLUDES RENISHAW RMP600 RADIO PROBE, TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.
w/ Fanuc CRX-10iA/L Robot Arm
w/ UNIVERSAL ROBOTS UR10e Robot Arm
Includes: - Clamp/Unclamp Control - Part Seat Confirmation. Electrical I/F Only.
NOTE: Hydraulic Clamp/Hydraulic Unclamp/Pneumatic Part Seat)
NOTE: 2 Hydraulic Clamp/2 Hydraulic Unclamp/2 Pneumatic Part Seat)
VC-Ez 26
The following functions are included as standard on the SMOOTH control: NO443 B)MAZACC-2D SOFTWARE(SHAPE COMPENSATION)(G61.1) NO444 D)MAZACC-3D HIGH-SPEED SOFTWARE PACKAGE(G5P2) NO445 B)SHAPE COMPENSATION FOR ROTARY AXES NO497 D)HIGH SMOOTHING CONTROL (REQ.MAZACC-3D) NO498 RAPID OVERLAP The following additional control functions are with the SMOOTH STANDARD PACKAGE: * SEAMLESS CORNER CONTROL * VARIABLE ACCELERATION CONTROL * ULTRAHIGH-SPEED MACHINING MODE
NOTE: Extended Card can be used to connect CNC to field network (robot, sequencer, remote IO).
Allows the base units of a machine to be changed between inch and metric units
This option allows the programmer to temporarily shift the workpiece origin to a new location using any combination of X, Y, Z and make that the active cutting plane. G68 G-Code is used.
Note: Requires manual cylinder position/angle adjustment. Up to a 6" maximum stroke for air nozzle.
Note: Air nozzle can be programmed to rotate to specific angular positions for each tool. Up to a 6" maximum stroke for air nozzle. Air nozzle can be used in conjunction with or without programmable coolant.
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
NOTE: THIS PACKAGE INCLUDES THE RENISHAW WIRELESS OTS-AA TOOL SETTER WITH ROTATING TOOLSETTING SOFTWARE CABABLE OF SETTING LENGTH, DIAMETER, AND DETECTING BROKEN TOOLS. THIS PACKAGE ALSO INCLUDES THE PREP FOR MAZAK MONITORING SYSTEM B OPTICAL OMP60 WITH INSPECTION PLUS SOFTWARE.
NOTE: INCLUDES RENISHAW OMI-2T DUAL PROBE OPTICAL RECEIVER, OMP60 OPTICAL PROBE (AA BATTERY), WIRELESS OTS-AA TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
NOTE: INCLUDES RENISHAW RMP600 RADIO PROBE, TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.