Allows the base units of a machine to be changed between inch and metric units.

This option allows the programmer to temporarily shift the workpiece origin to a new location using any combination of X, Y, Z and make that the active cutting plane. G68 G-Code is used.

Note: Requires manual cylinder position/angle adjustment. Up to a 6" maximum stroke for air nozzle.

Note: Air nozzle can be programmed to rotate to specific angular positions for each tool. Up to a 6" maximum stroke for air nozzle. Air nozzle can be used in conjunction with or without programmable coolant.

NOTE: Required when the Niagara Coolant option (CS300) is selected

*NOTE: Requires 100-120V power supply

NOTE: Requires the 95 Gallon Coolant Pan Option (CS840)

Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.

Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.

Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.

Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.

Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.

Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used

Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used

Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used

NOTE: THIS PACKAGE INCLUDES THE RENISHAW WIRELESS OTS-AA TOOL SETTER WITH ROTATING TOOLSETTING SOFTWARE CABABLE OF SETTING LENGTH, DIAMETER, AND DETECTING BROKEN TOOLS. THIS PACKAGE ALSO INCLUDES THE PREP FOR MAZAL MONITORING SYSTEM B OPTICAL OMP60 WITH INSPECTION PLUS SOFTWARE.

NOTE: INCLUDES RENISHAW OMI-2T DUAL PROBE OPTICAL RECEIVER, OMP60 OPTICAL PROBE (AA BATTERY), WIRELESS OTS-AA TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.

NOTE: INCLUDES RENISHAW RMP600 RADIO PROBE, TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.

INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.

NOTE: Only available on Mazak supplied Rotary tables only

NOTE: Only available on Mazak supplied Rotary tables only

NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical IF

NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F

* Customer/Integrator's responsibility to conform to standard interface, and integrate their equipment. * I/O map available after order. * Does not include modifications during installation. * Does not include integration support. * Integration support not available.

ADVANCE robot interface improvements over BASIC: * Can minimize E-Stop area affected. * Allows high speed machine movement with door open during robot service (Lathes) * Customer/Integrator's responsibility to conform to standard interface, and integrate their equipment. * I/O map available after order. * Does not include modifications during installation. * Does not include integration support. * Integration support not available.

Electrical I/F Only.

NOTE: Hydraulic Clamp/Hydraulic Unclamp/Pneumatic Part Seat)

NOTE: 2 Hydraulic Clamp/2 Hydraulic Unclamp/2 Pneumatic Part Seat)

NOTE: The CD-ROM set consists of all maintenance, operation, parts, electrical, PLC, service procedure, tooling, CNC programming and operation manuals.

Note: For use with 12,000 rpm spindle option

Note: For use with 12,000 rpm spindle option

Note: For use with 15,000 rpm spindle option