VC-Ez 20 2PC
- Rugged 25 hp, 12,000 rpm (standard) or versatile 29.5 hp, 15,000 rpm (optional) spindle
- Highly efficient 30-tool or optional 50-tool auto tool changer.
- Hybrid MX Roller Guide System improves rigidity, accuracy and reliability.
- Pre-tensioned ball screw system with support at each end.
- New space-saving machine design with optional chip management solutions.
![](https://ezseries.mazakusa.com/wp-content/uploads/2024/08/VC_EZ20_2PC_right_front.png)
- Specifications
- Resources
VC-Ez Collateral
VC-Ez 20 2PC Foundation Drawings
VC-Ez 20 2PC Total View Drawings
Build Your Machine:
VC-Ez 20 2PC
NOTE: Extended Card can be used to connect CNC to field network (robot, sequencer, remote IO).
This option allows the programmer to temporarily shift the workpiece origin to a new location using any combination of X, Y, Z and make that the active cutting plane. G68 G-Code is used.
Note: Requires manual cylinder position/angle adjustment. Up to a 6" maximum stroke for air nozzle.
Note: Air nozzle can be programmed to rotate to specific angular positions for each tool. Up to a 6" maximum stroke for air nozzle. Air nozzle can be used in conjunction with or without programmable coolant.
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
* Customer/Integrator's responsibility to conform to standard interface, and integrate their equipment. * I/O map available after order. * Does not include modifications during installation. * Does not include integration support.
ADVANCE robot interface improvements over BASIC: * Can minimize E-Stop area affected. * Allows high speed machine movement with door open during robot service (Lathes) * Customer/Integrator's responsibility to conform to standard interface, and integrate their equipment. * I/O map available after order. * Does not include modifications during installation. * Does not include integration support. * Integration support not available.
Includes: - Clamp/Unclamp Control - Part Seat Confirmation Note: This is electrical I/F only and does not include any mechanical prep. or fixture.
NOTE: 2 Hydraulic Clamp/2 Hydraulic Unclamp/2 Pneumatic Part Seat)
CD will include each of the following manuals: Programming Operating Tooling Maintenance Parts List Electrical Circuit Diagrams
Note: For use with 12,000 rpm spindle option
Note: For use with 15,000 rpm spindle option