QT-Ez 8
- Powerful and reliable integral motor headstock designs.
- Hybrid MX Roller Guide System improves rigidity, accuracy and reliability.
- Pre-tensioned ball screw systems with support at each end.
- 12 position drum turret (bolt on type) for rotary tool applications.
- Tailstock options include a manual position with hydraulic quill or servo positioning capability.
- Seamless integration of bar feeders and robots for unattended operations.
- Specifications
- Resources
QT-Ez Collateral
QT-Ez 8 Series Spindle drawings
QT-Ez Series Foundation Drawings
QT-Ez Series Total View Drawings
QT-Ez Series Total View Drawings (DWG)
QT-Ez Series Total View Drawings (DXF)
Build Your Machine:
QT-Ez 8
2" diameter bar capacity. Maximum spindle speed 5000 RPM.
NOTE: 1.5" diameter bar capacity. Maximum spindle speed 6000 RPM.
THIS CHUCK HAS A 1.625" BAR CAPACITY THROUGH THE CHUCK ONLY CHUCK PACKAGE CAPACITY WILL DEPEND ON CYLINDER PACKAGE BEING SUPPLIED.
(MT No.5) (290 PSI / 2.0 Mpa MAX) **NOTE: DOES NOT INCLUDE THE LIVE CENTER
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used
w/ Fanuc CRX-10iA/L Robot ARM and 2-zone area scanner Payload Capacity: Up to 10kg - Customer to supply separate 110VAC, 15 amp power drop -Includes Robot Interface Ethernet/IP
w/ Schunk PZN-100-1-SD Part Weight: up to 5.5kg (CC-10 ONLY) Part Diameter: Min dia. 25mm, Recommended max dia. 150mm, Absolute max dia. 200mm Stroke: 10mm per jaw Finger adjustment: Every 2.5mm Part OD Turn Capability: <16mm
w/ Dual Schunk PZN-80-1-SD Part Weight: up to 5kg Part Diameter: Min dia. 25mm, Max dia. 100mm Stroke: 8mm per jaw Finger adjustment: Every 5mm Part OD Turn Capability: from max to min dia.
PRICE INCLUDES: Two (2) Pushers, One (1) Spindle Liner, Mazak Interface, One (1) Year Warranty and Installation by Edge Service Engineer.
PRICE INCLUDES: Three (3) Pushers, One (1) Spindle Liner, Mazak Interface, One (1) Year Warranty and Installation by LNS Service Engineer.
PRICE INCLUDES: Two (2) Pushers, One (1) Spindle Liner, Mazak Interface, Two (2) Year Warranty and Installation by ATS Service Engineer.
INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.
53208000201 5 TURNING BLOCK 5B078010100 2 TURNING HOLDER 5B078010302 2 BORING BAR HOLDER 1 1/2"ID 53178011102 1 BORING BAR SOCKET 1 1/4"ID X 1-1/2"OD 53178011202 1 BORING BAR SOCKET 1" ID X 1-1/2"OD 53418013200 1 DRILL SOCKET MT NO 2 ID X 1-1/2"OD 5B078010402 1 U DRILL HOLDER 40MM ID Bolt-on toolholders are NOT prepared for 1000 PSI coolant pressure