VC-Ez 32
- Rugged 25 hp, 12,000 rpm (standard) or versatile 29.5 hp, 15,000 rpm (optional) spindle
- Highly efficient 30-tool or optional 50-tool auto tool changer.
- Hybrid MX Roller Guide System improves rigidity, accuracy and reliability.
- Pre-tensioned ball screw system with support at each end.
- New space-saving machine design with optional chip management solutions.
- Specifications
- Resources
VC-Ez Collateral
VC-Ez 32 Foundation Drawings
VC-Ez 32 Total View Drawings (PDF)
VC-Ez 32 Total View Drawings (DWG)
VC-Ez 32 Total View Drawings (DXF)
Build Your Machine:
VC-Ez 32
NOTE: Optional MT Connect adapter is required for MT Connect use.
NOTE: Extended Card can be used to connect CNC to field network (robot, sequencer, remote IO).
Allows the base units of a machine to be changed between inch and metric units.
This option allows the programmer to temporarily shift the workpiece origin to a new location using any combination of X, Y, Z and make that the active cutting plane. G68 G-Code is used.
Note: Requires manual cylinder position/angle adjustment. Up to a 6" maximum stroke for air nozzle.
Up to a 6" maximum stroke for air nozzle. Air nozzle can be used in conjunction with or without programmable coolant.
Mazak SuperFlow S8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including one high-capacity bag filter vessel.
Mazak SuperFlow T8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including two high-capacity bag filter vessels.
Mazak SuperFlow V8M / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with manual cross over.
Mazak SuperFlow C8 / 1000 single outlet, fixed high pressure coolant system (1000psi/8gpm measured at the pump) including Single Bag Type Filter for cyclonic filter sediment only. The coolant will be filtered by the cyclonic filter only and this is not a crossover type filter system.
Mazak SuperFlow V8A / 1000 single outlet, variable high pressure coolant system (200psi - 1000psi/8gpm measured at the pump) including dual high-capacity bag filters with auto-cross over.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used.
Includes the following High-Performance functionality: - New GUI with special HP conveyor screen on the Ez control. - Inverter control for Forward/Reverse motion. - Variable Speed Function (3 speeds: High, Medium, & Low) - Intermittent Operation Function - Overload Detection Function. Conveyor will automatically reverse direction once load is detected and then return to forward direction after a period of time. - Synchronized Auto Operation Function. Conveyor automatically turns on/off when used.
INCLUDES RENISHAW OMI-2T DUAL PROBE OPTICAL RECIEVER, OMP60 OPTICAL PROBE (AA BATTERY), WIRELESS OTS-AA TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
NOTE: INCLUDES RENISHAW RMP600 RADIO PROBE, TOOLSETTER, INSPECTION PLUS SOFTWARE, AND ROTATING TOOL SETTING SOFTWARE.
INCLUDES: 2 days onsite training by Renishaw and Calibration Tool. SPECIAL NOTE: For installation in Mexico add $2,000.
NOTE: Only available on Mazak supplied Rotary tables.
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
NC ROTARY TABLE PACKAGE INCLUDES: - Servo Motor And Servo Amplifier - Piping And Hoses For Clamp Mechanism - Electrical I/F
*Customer/Integrator's responsibility to conform to standard interface, and integrate their equipment. * I/O map available after order. * Does not include modifications during installation. * Does not include integration support. * Integration support not available
ADVANCE robot interface improvements over BASIC: * Can minimize E-Stop area affected. * Allows high speed machine movement with door open during robot service (Lathes) * Customer/Integrator's responsibility to conform to standard interface, and integrate their equipment. * I/O map available after order. * Does not include modifications during installation. * Does not include integration support. * Integration support not available.
NOTE: Hydraulic Clamp/Hydraulic Unclamp/Pneumatic Part Seat)
NOTE: 2 Hydraulic Clamp/2 Hydraulic Unclamp/2 Pneumatic Part Seat)
CD will include each of the following manuals: Programming Operating Tooling Maintenance Parts List Electrical Circuit Diagrams
NOTE: The CD-ROM set consists of all maintenance, operation, parts, electrical, PLC, service procedure, tooling, CNC programming and operation manuals.
NOTE: The paper set consists of all maintenance, operation, parts, electrical, PLC, service procedure, tooling, CNC programming and operation manuals.
Note: For use with 12,000 rpm spindle option
Note: For use with 15,000 rpm spindle option